Regular snow blower maintenance is important to ensure your machine is in good working order and stays that way! Depending on where you live, snow is basically inevitable and you don’t want to be stuck shoveling all winter.
That is certainly the reason why you want your snow blower to be ready to work well. Then it will be able to clear the snow away for you. As a result, it is truly vital for you to keep your snow blower in good condition.
Therefore we’d like to share a few tips to help you with your routine snow blower maintenance.
Snow Blower Maintenance Tip #1
Conduct An Inspection Of The Various Parts
The reality is that your snow blower sits for a long time without being used before the snow of winter comes. Before using your snow blower, it is always wise to make sure that you conduct an inspection of the belts, nuts, screws, bolts and cords of the snow blower.
This will allow you to verify if anything is loose and this is the most important snow blower maintenance tip. If you discover that some parts are loose, then you should tighten those items. Also, conducting an inspection will allow you to see if something needs to be replaced.
Single-stage snow blowers are designed to function with the usage of only one belt. However, two-stage snow blowers are designed to function with the usage of two belts. Thus, one belt serves the drive and the other belt serves the auger of the two-stage snow blower.
Maybe you will notice that the belts have any areas that are cracked or that have become worn.. If so, then it is most definitely time to get new belts for your snow blower.
Perhaps the belts of the snow blower are in good condition. But you still should check to see that the belts of the snow blower are indeed tight enough. This will help to ensure the safety and proper functionality of the snow blower.
Furthermore, it is a good idea to check the condition of the starter cord. Certainly, you should replace the starter cord if there are parts of it that are frayed.
Snow Blower Maintenance Tip #2
Change The Gas And The Oil
A combination of gas and oil are used by engines that have two cylinders. Pure gas is required for an engine that is designed with four cylinders. There is an individual case for the oil.
For either type of engine, it is wise to drain the fluids from your snow blower that has sat for several months without being used.
Replace the fluids with fresh fluids to ensure the optimal functioning of your snow blower. When you need to change the oil, you should turn the engine on.
Give the engine some time to warm by allowing the engine to run for five minutes or so. Turn the engine off and then take off the oil plug.
Use a waste can for the drainage of the oil. When the oil has been completely drained, put the plug back in place and tighten it appropriately. Then it is time to fill your engine by using the proper amount of oil.
Again, start up the engine to indicate the level of the oil. As an extra precaution, check that the drain plug has been tightened enough and that no leaks have occurred.
Snow Blower Maintenance Tip #3
Check The Chains And Tires
You should see if there is enough pressure in the tires of the snow blower. If not, then be sure to add some more air to the tires accordingly. If you notice that the tires are worn quite a bit, then it is time to get some new tires for your snowblower.
Make sure that the chains that you use for the tires are in good condition by being solid and intact. Put the chains on the tires to be ready for the next storm.
Or ensure that the chains are easy to access when you need them if you use them only occasionally.
Snow Blower Maintenance #4
Replace The Spark Plugs
You should consult the owner’s manual that came with your snow blower. You can then be sure that you possess the right replacements for the spark plug. To replace the spark plug, take the lead wire off.
You will need a socket wrench for the removal of the spark plug. Then put on a new spark plug. But use caution that you do not tighten the new spark plug too much. Then attach the lead wire once again.
Snow Blower Maintenance Tip #5
Lubricate The Chassis And Drive
When you decide to lubricate your snow blower, you need to consult the owner’s manual of the snow blower. This is because you need to find out what type of lubrication you should use.
It is a good idea to place the snow blower on one side if possible.. This will allow you to better reach each part with ample lubrication. In addition, it then is easy for you to conduct an inspection of the rubber on the auger, the skid shoes as well as the scraper bar.
Maybe you are able to place your finger in the space between the housing and the rubber of the auger. Then you definitely must get new rubber for the auger.
On each side of the housing of the auger is where you will find the skid skin shoes. The skid shoes adapt to the position of the auger. This prevents the auger from gathering stones or scraping on the ground. If the skid shoes become worn, then it is time to get new ones.
Naturally, the scraper bar is the part that comes in contact with the ground to remove the snow from it. When this part becomes worn, you must get a new scraper bar.
If you continue to use one that is worn out, this can result in the housing of the snow blower experiencing some damage.
We have provided some insightful tips regarding snow blower maintenance. When you are careful to follow them, you will be glad that your snow blower will be ready to work hard after the next snow storm.
My name is Matthew Brown (editor and self-proclaimed snowblower expert) and I’ve lived in Wisconsin my entire life, so you could say I know a thing or two about harsh winters.
No matter what you need when it comes to snow blowers, maintenance, which to choose and why… you’re in the right place.
Let me know if you need any help or have any questions!