You have questions and this snow blower FAQ has answers to your frequently asked questions!
A snow blower has a lot of uses and is a must-have, especially for those who live in snow-prone areas and want a more efficient way to remove snow.
This is because the winter season brings blocks on the road, driveways, roofs, and other places which can pose a serious threat to the safety and security of everyone.
Benefits of Using a Snow Blower
Deciding to try something can cause a lot of hesitation, especially if you’re unfamiliar with it or it’s your first time hearing about it. But, some things are worth the try! Especially when you consider all of the benefits that come from using one!
- Time-efficient. Compared to using a shovel, using a snow blower accomplished your task in a faster, easier way. What can take a whole day can already be done in a few hours, so it saves you a lot of time.
- Reduces back pain and shoulder pain. Similar to what using a shovel does to your time, using a snow blower makes a big difference in reducing your back pain and shoulder pain. Especially if you have injuries or subtle joint pains, investing in a snow blower you can use for a long time is a great decision.
- Energy-efficient. Because there are various models of snow blowers, there are also various levels of energy and electricity consumption. Of course, this will depend on various factors such as the size, price, and capacity of the snow blower that you’re going to buy.
- Has a wide range of prices. Not everyone has the budget to afford machines that have a high price. Fortunately, there are a lot of snow blowers that are affordable and offer-high quality functions at the same time. This is another reason why you shouldn’t hesitate to use it; you can opt for budget-friendly ones first and then choose something at a high price a little later.
- Has a wide range of models. Because everyone has different preferences and needs, knowing that snow blowers have a wide range of models can help you decide if it is for you. From lightweight ones to heavy-duty ones, the choice will be ultimately up to you.
- Safe to use. Clearing pathways and roads help promote safety and security, but the safety of the user should be considered too. The good thing about snow blowers is that there are a lot of models that are user-friendly, so it can be used by everyone. Men, women, teenagers, kids (as long as they are supervised, of course!).
Snow Blower FAQ: Starting Up
How Do You Start A Snowblower?
- Examine the oil level. Make sure the oil level on your snowblower is at the “full” mark before turning it on. If not, follow the manufacturer’s directions and top off as needed.
- Recharge your batteries. Before you begin, make sure you have plenty of fuel. Make sure it’s new, especially if it’s been a while since you used your snowblower.
- Make sure the drive control is set to neutral. Before starting your snowblower, ensure all drive controls are turned off for safety reasons.
- The choke should be set to maximum. FULL The term “choke” refers to a tightening of the throat.
- Set the Throttle to the FAST setting (rabbit symbol). Always use your snow blower with the FAST setting on the throttle.
- The Fuel Shutoff Valve should be opened. To begin, turn the valve to the ON position. Close the fuel shutdown valve when the snowblower is not used to prevent leaks.
- Turn the key in the ignition. Change the setting to “on” or “run.”
- Place the Safety Ignition Key in the ignition. Position the key in place until it snaps into place. Some snowblower engines merely require an ignition switch and do not require a key.
- Push the primer bulb. It is a bubble-like switch that aids in fuel circulation. It should be enough to push it a few times. Don’t push the priming (if you used the snowblower less than five minutes before starting again).
- Start the engine.
How Do You Start A Snowblower With A Choke?
Step 1: Make the choke as tight as possible (closed).
Step 2: Before pulling the ignition wire or pressing the starter, start the engine according to the manufacturer’s instructions, including three to four pumps on the gasoline primer.
Step 3: Slowly reduce the amount of choke by adjusting the choke lever for several minutes until the engine heats up.
Step 4: Once the engine runs smoothly, fully open the choke. When the engine is running normally, do not apply a choke; this can result in excessive fuel consumption and may cause the engine to flood, leading it to shut down.
Why Won’t My Snowblower Start?
If your snowblower isn’t starting, look for gas, compression, or spark problems.
First, make sure the gas in the tank is fresh; old gas can cause gummy deposits that make it difficult to start. Sticky residues block the carburetor, so clean it or replace it if it’s clogged.
Check the gasoline line and fuel filter for clogging and replace them if necessary. Another simple item to check is the spark plug; if it is damaged or has a sooty electrode, it should be replaced.
If the stop switch isn’t allowing the spark plug to receive current, replace it. An oil change and a proper engine tune-up may help the engine start.
Related Blog Post: Snow Blower Won’t Start? Here’s What To Do
How Do You Start An Electric Start Snowblower?
An electric start blower user can start the unit by pressing a button and you will usually need to pull a lever prior to pushing. The engine fires when the button is pressed, and you’ll be up and running in no time.
Related Blog Post: Cordless Electric Snow Blower
How Do You Start A Flooded Snowblower?
If you think you flooded the engine with fuel when trying to start it, now is an excellent time to pull the starter cord multiple times with the spark plug out. It will drive any remaining fuel vapors out of the cylinder and help to dry it out.
If you do this, make sure your ignition switch is switched off so that none of the escaping fumes are mistakenly ignited.
Snow Blower FAQ: Storage
How Do You Store A Snowblower?
- The gas should be removed or stabilized. To prevent gum deposits from building in the tank, fuel lines, filter, and carburetor during storage, either remove the gas or treat it.
- The snowblower should be cleaned. To avoid corrosion, wipe the dirt and other debris from the frame, tires, and auger blades. Dry all metal parts with a clean rag.
- Make sure the working parts are lubricated. Lubricate the wheel axles, auger shaft, chute control, and drive gear shaft.
- All nuts and bolts on the auger and chute area should be checked and tightened. All wires should be secured.
- On painted surfaces, repair any rusted or damaged patches by lightly sanding the affected area before applying touch-up paint.
- Wrap it up and put it away. A sturdy tarp or snowblower cover should be used to protect the snowblower. Store the snowblower in a dry garage or shed if feasible.
How Do You Winterize A Snowblower?
- Winterize your snowblower’s fuel tank. Carefully add some fuel stabilizer to the gas can before filling the snowblower fuel tank with new gasoline.
- Your snowblower’s chute should be cleaned. It would be best to clean any debris, dust, grease, or muck from your snowblower’s chute, motor, and muffler. It’s a good idea to apply a little coat of oil to any parts of your snowblower that are prone to rust.
- Inspect your snowblower’s spark plug. Remove the snowblower’s spark plug. Examine it for evidence of corrosion or residue accumulation. If necessary, a wire brush can be used to clean it.
- Remove the spark plug from the ignition system. The spark plug must then be removed. To coat the cylinder walls with oil, recoil, and start the engine by turning it over several times (with the ignition off).
- Lubricate. Using grease or oil, lubricate all of the required places in this phase. Remove the underside of the unit’s lower frame cover. Using a light application of oil, lightly coat the hex shaft.
- Examine the belts. So that the track is suspended above the ground, loosen the channel and block up the chassis. Remove the front of the engine’s belt cover and inspect the belts for wear, cracks, and fraying.
- Place the snowblower in a suitable location. Store the snowblower with the cover in a dry, well-ventilated area.
How Do You Summarize A Snowblower?
- Drain the Gasoline. Even if the gas has been stabilized, we recommend draining the fuel system of your snowblower before putting it away for the season. Over time, gas oxidizes and breaks down, forming sludge in your snowblower’s fuel tank, carburetor, and fuel lines.
- Protect the engine. Before putting your blower away, ensure the engine is in good working order after taking care of the gasoline. The operator manual for your snowblower model will have recommendations on protecting the motor.
- Perform a general inspection of the machine. Check your engine oil and, if necessary, replace it. Lubricate components as needed, and inspect critical parts like the auger belt and wheels for wear.
- Wrap it up and store it. You’ve done everything you can to ensure that your machine is ready for summer storage, and now all you have to do is wrap it up and store it.
Related Blog Post: How To Summerize A Snowblower
Snow Blower FAQ: Maintenance
How Often Should I Service My Snowblower?
After the first 5 hours of use, oil changes are required, but not again until the end of the year or after 50 hours of use. However, we recommend changing your snowblower oil every 5 hours to ensure it’s at the proper amount and not too dirty.
Maintenance of an electric vs gas snow blower necessitates specific additional considerations:
- Before each use, check the oil level and add as needed.
- The spark plug should be changed every 100 hours or once a season.
- If necessary, replace the air filter.
Related Blog Post: Snow Blower Maintenance Tips
How Do You Replace A Snowblower Shear Pin?
- Check your snow blower’s owner’s manual to get the right shear pin size.
- Make sure the snow blower is turned off. While you have your hands inside the blade mechanism, pull the wire off the spark plug, so you know the snowblower won’t start.
- Remove anything jammed in the auger with the clean-out tool with your snowblower.
- Once the auger is free to move, crank it by hand until you see where the shear pin should go.
- Remove any residual shear pin fragments. It should be simple to remove. When they break, they may fall out entirely.
- Align the driveshaft holes until the replacement shear pin can be pushed into place. Tighten the nut on the shear pin’s threaded end.
- Manually rotate the auger to ensure the blades are in good working order. If that doesn’t work, look at the secondary shear pins to see if one of them is the issue.
- Remove the spark plug and reconnect it. Make sure the snowblower is turned on and working correctly.
How Do You Clean A Snowblower Carburetor?
- Look over the instructions. Get a copy of the snow blower’s manual and examine it thoroughly.
- Remove the carburetor. Remove the carburetor using a screwdriver. Depending on your model, you’ll have to remove specific components differently.
- Submerge in the cleaning solution. Remove the snowblower carburetor and soak it for three hours in a cleaning substance. Impurities will be removed as a result of this.
- Clean the tiny holes. The carburetor’s microscopic holes will need to be cleaned next. It will assist you in getting rid of any contaminants that have accumulated in those spots.
- Use air to clean. Blow some air into the openings after you’ve cleared the contaminants. Any things that may still be stuck in the holes are removed by blowing in the air.
- Reassemble the carburetor. Reinstall the snowblower’s carburetor.
Related Blog Post: How To Clean A Carburetor On A Snowblower
Where Do You Spray Starter Fluid On A Snowblower?
Starting Fluid aids in the rapid start of gas-powered engines. It’s suitable for use in extremely cold or humid conditions.
To quickly introduce fuel to the combustion cylinder, starting fluid is sprayed into the engine intake near the air filter, carburetor bore, or spark plug hole.
Snow Blower FAQ: Oil Related
How Do You Change Oil In A Snowblower?
- Warm the oil by running the engine for a few minutes.
- Stop the machine, take out the key, and place it on a flat, level surface.
- Disconnect the spark plug wire from the engine after cooling the hot parts.
- Place an oil drain pan underneath the oil drain stopper.
- Allow the oil to drain by removing the oil drain stopper.
- Reinstall the drain cap and tighten it after the oil stops draining.
- Remove the oil fill port cap and add the correct oil type and quantity to your engine.
- Replace the lid and dipstick.
- Remove the dipstick and check that the oil level is right according to the dipstick markings.
- Reattach the spark plug wire to the spark plug and replace the cap/dipstick.
- Start the unit and run the engine for a few minutes to ensure no oil seeps from the drain plug area.
How Much Oil Does A Snowblower Take?
The capacity of the oil you put in a snow thrower vs snow blower is determined by its engine power. The oil content of the 208cc, 179cc, and 123cc engines is 20-25 grams, while the 420cc, 357cc, and 277cc engines have a displacement of 40 ounces.
Overfilling leads to difficulty in starting a lot of dirty spark plugs.
What Kind Of Oil Does A Snowblower Take?
Since snowblowers are only used in cold weather, they usually require SAE 5W-30 weight oil, ensuring that the engine will start in cold weather.
The required oil should be found in the maintenance section of the snowblower’s operating manual.
Snow Blower FAQ: Gasoline
How Do You Drain Gas From A Snowblower?
- Remove the cap from the fuel tank. On the snowblower, look for the lid where the gas goes in. Remove the cap. One of the siphon pump tubes should be inserted into the fuel tank.
- Prepare the Catch Pan. Place the pan you’ll be catching the gas in at a safe distance from the fuel tank. Place the second tube’s end into the catch pan.
- Empty the Gas Squeeze the pump on the siphon pump with one hand while stabilizing the siphon pump device. It will allow you to remove most of the gas from the snowblower’s fuel tank.
- Run the engine to get rid of any excess gas. Despite your best efforts, a tiny amount of gas will remain in the snowblower. By starting the machine, you can get rid of this. Replace the gasoline tank cap, start the engine, and let it run until it shuts down due to a lack of gas on its own.
Related Blog Post: How To Drain Gas From Snowblower
How Long Does Gas Last In A Snowblower?
Whether in a gas can or your snowblower, gas can grow stale in as little as 30 days. If stored in a sealed and labeled metal or plastic container, pure gas will decay and lose its combustibility in three to six months due to oxidation and evaporation.
Blends of ethanol and gasoline have two to three months of shelf life
Snow Blower FAQ: Purchasing
What is a Good Snow Blower to Buy?
A good snow blower has a smooth, single-lever chute control that delivers snow in whichever direction you want it to go. You may usually check out floor samples at retailers. Make sure you’re comfortable with the handle height and chute adjustment settings, as you’ll be using them a lot.
On most multistage snow blowers, the drive wheels feature four to six forward speeds, plus one or two reverse speeds, compared to only one on single-stage machines.
While slogging through heavy snow, having a variety of speeds can help prevent jams. On multistage models, a handlebar-mounted trigger release reduces steering effort by disengaging power from one or both drive wheels.
How Much Is A Used Snowblower Worth?
The price of a used snowblower varies significantly. For example, a small secondhand snow thrower can be purchased for approximately $70, but larger three-stage snow blowers would cost between $300 and $600.
When you buy a used product, you’re taking a risk because it’s likely no longer covered by the manufacturer’s warranty. On the other hand, purchasing a reconditioned or used snowblower is an excellent way to save money.
Related Blog Post: Cheap Snow Blower: Things To Consider And Look Out For
Related Blog Post: How Much Is A Snow Blower
Snow Blower FAQ: Durability
How Long Do Snowblowers Usually Last?
An excellent snowblower should last between 15 and 25 years. However, treating and maintaining your machine will determine how long it lasts. While the amount of maintenance required varies according to the style, band, and how often you use the blower, you should plan to perform a basic parts inspection and maintenance every twenty hours. A well-maintained snowblower can easily last two to three decades if properly maintained.
How Long Do Snowblower Belts Last?
Replace the belts on your two-stage snow blower if you haven’t done so since the day you got it. Depending on how frequently you use your snowblower each year, factory belts can last five to seven years.
Snow Blower FAQ: Miscellaneous
Can You Use A Snowblower On Grass?
Yes, you can clear light or heavy snowfall using a snowblower on your grass. However, only use a snowblower that won’t give your lawn an ugly haircut when clearing snow.
When used on grass, not all snowblowers produce the best results. Some will rip up your lawn and expose the soil beneath it.
Related Blog Post: How To Properly Use A Snow Blower
What Size Snow Blower Do I Need?
The better question is probably more along the lines of… “What size snow blower do I need for where I live?”
The reason is simple… if you only get 1 inch here and there, it makes no sense to buy a single or two-stage snowblower.
So, the first thing you should look for when choosing a suitable snow blower for your needs is the amount of snowfall daily/annually depending on the location where you live.
Related Blog Post: What Size Snow Blower Do I Need
Why Does My Snowblower Leave A Layer Of Snow?
Snow and ice are chiseled off the ground and into the auger by a flat metal bar on the machine’s underside. Running over asphalt, concrete, and gravel can wear down the metal, resulting in snow furrows.
Remove the bolts that hold the snow blower’s bar to the housing and replace them with a new one. Adjust the height of the new bar to roughly 1/8 inch above the ground and you should be set.
How Much Snow Do You Need To Use A Snowblower?
Snowblowers can handle any amount of snow. However, you’ll get the best results if more than two inches of snow are on the ground. There are a few more things to consider when removing snow, such as the sort of snow and the surface you’ll be dealing with.
Also, keep in mind that it’s all dependent on the blower. Some can only handle up to 6 inches and others up to 18 inches.
Related Blog Post: How Much Snow Do You Need To Use A Snow Blower
How Many Inches Of Snow To Use Snowblower?
If you live in an area where snowfall is frequent or heavy (up to 3 inches deep), the ideal instrument for clearing is a snowblower. A single-stage snow blower is a perfect option for clearing a small to a medium-sized patch of snow 3 to 9 inches deep.
We suggest a two-stage or three stage snowblower if you’re dealing with wet, heavy snow in a medium to ample space. Utilizing the appropriate snowblower is critical to clearing your yard or driveway of excessive snow with less effort.
How Much Does A Snowblower Weigh?
An average snow blower weighs 90 to 110 pounds for clearing widths 22 to 24 inches and 210 to 310 pounds for clearing widths of more than 24 inches.
Most of the weight comes from the induction accelerator. Labeled as “clearing width,” it will show you the weight of the snowblower.
How Do You Keep Snow From Sticking To A Snowblower?
Using excellent spray lubrication to keep snow from sticking to your snowblower is the easiest and most efficient method. Snow and ice repellent sprays and exterior care Teflon spray for automobiles can also be used. Even using cooking spray helps.
Another strategy to keep snow from sticking is to walk quicker while using your snow blower and clear the snow as early as possible in the day. The third method frequently removes tiny amounts of snow to avoid snow from sticking to your snowblower.
How Do You Keep A Snowblower From Clogging?
Using a non-stick snowblower spray is one technique to keep your snowblower from clogging. It acts similarly to cooking spray in that it makes surfaces slick and makes it difficult for snow to stay.
Simply spray the aerosol liquid on the auger and inside the discharge chute of your snowblower. Snowblower non-stick spray is available at most hardware stores.
You can also use WD-40 or cooking spray. Another option is to move faster as you use your snowblower. The quicker you go, the faster the snow will flow through the machine, reducing the chances of clogs.
How Do You Use A Snowblower In Wet Snow?
- Coat the Chute with paint. Wet snow is a sticky situation. When there’s a lot of snowfall to deal with, your snowblower can quickly become clogged. The chute might always be coated with a non-stick coating. Several solutions include Teflon-based sprays, silicone spray, WD-40, and ski wax. All of them perform nicely in wet snow.
- Take it easy. Rushing through wet snow is inefficient and ensures that your chute will become clogged. There’s also the risk of snowblowers breaking down due to wear and strain.
- Toss the snow as far as you can. It’s advisable to take in less snow at a time for the best benefits. As a result, the machine may use all of its power on smaller loads, increasing its throwing efficiency.
- While the snow is still fresh, clear it. it’s because it melts in a short amount of time, which is when the process becomes increasingly difficult-although slightly tricky, getting up at the crack of dawn is preferable.
How Deep Is Too Deep For A Snowblower?
Single-stage snow blowers are generally limited to 6 to 9 inches of snow depth, and even the most powerful machines will struggle with snow depths of more than 16 inches. Two-stage snow blowers can handle snowfalls of up to 12 inches.
Many times a self propelled electric snow blower will have engines with various speeds that you can adjust as desired. Snowblowers with three stages can clear snowfall up to 20 inches deep. These are perfect for large homes with long driveways. So, you’re looking at a minimum capacity of 6 inches and a maximum capacity of 20 inches.
While not everyone requires a snowblower, having one can be helpful, mainly if you live in a region that receives a lot of snow in the winter.
It’s important to remember that not all snow blowers are created equal. It’s critical to understand the variables to consider when purchasing a snowblower to acquire the proper one for your needs. Before you buy anything, make sure you read the manual thoroughly.
Examine the specifications to see if they fit your snowblower or if any attachments that make snow removal easier are included.
Finally, you can find suitable snow blowers if you know what to search for. If your driveway is covered in snow or your snow blower has broken down, you owe it to yourself to either stop shoveling or investigate the problem with your machine.
If you have any more questions, feel free to contact us so we can answer them and add them to this Snow Blower FAQ page.